taurus esu lok dcc 4.0

Informatii utile din sfera DCC
Avatar utilizator
PrinzEugen
Mesaje: 64
Membru din: Sâm Ian 21, 2012 12:00 am
Localitate: Belgrade
Contact:

taurus esu lok dcc 4.0

Mesaj de PrinzEugen » Lun Noi 06, 2017 12:23 am

Hi, i've noticed low buzzing sound when loco stands still, Lok was ddc ready, I have equipped her with esu lok 4.0 dcc.

Tried to remove coils but same thing, is this normal with esu or not ?

Imagine
Avatar utilizator
mpursu
Mesaje: 3306
Membru din: Sâm Aug 25, 2007 12:00 am
Localitate: Oradea
Contact:

Re: taurus esu lok dcc 4.0

Mesaj de mpursu » Lun Noi 06, 2017 10:06 pm

The loco stands still or tries to move at very low speed? ESU decoders produce a certains buzzing sound in the operating motors, especially at low speeds, which is normal.
The coils are necessary because, together with the capacitor at the motor connectors, they "smoothen" the spikes that are produced by the rotating motor. When the locomotive stands still, at speed 0, the motor is not powered at all, so there should be no buzzing.
Avatar utilizator
PrinzEugen
Mesaje: 64
Membru din: Sâm Ian 21, 2012 12:00 am
Localitate: Belgrade
Contact:

Re: taurus esu lok dcc 4.0

Mesaj de PrinzEugen » Mar Noi 07, 2017 12:15 am

Buzzing mosquito sound coming from decoder when loco stand still, and also when its moving.
I have tried this via jmri
11.1.2.6 Adaptive Regulation Frequency
The decoder operates ex works with a mutable (adaptive) regulation frequency to drive the motor as precisely as possible. However, as a result some motors might show a nasty buzzing noise.
For such motors you are able to set the regulation frequency on a constant value. Set bit 4 to “1” in CV 124. How to manually set cv124 , current value is 24 (it have 4 bits) ?

and also tried this piko values from esu table, but same buzzing sound remains.

Imagine
Scrie răspuns


Înapoi la “Totul despre controlul digital”

Cine este conectat

Utilizatorii ce navighează pe acest forum: Niciun utilizator înregistrat